Turner's Home Page Turner's Product Line Delta-Star Switches Engineering Center Typical Specifications Installation Help
Customer Service Site Search Contacts
TransmissionSubstationDistribution Vaccum InteruptersAutomation and ControlsAccessories
Double-End BreakCenter BreakVertical BreakHookstick SwitchesBT2 DisconnectBT2T Tandem DisconnectBT2S Angled DisconnectRH Regulator By-Pass

Hookstick Disconnect Switch

Type: BT2
Orientation: Upright mounting
Ratings: 7.5 kV through 34 kV
Ratings A: 600, 1200 Amperes
Request Bulletin E101
Download PDF Catalog
The Turner "BT2" switch is a hookstick operated switch used for changing connections in a circuit or for isolating purposes. Switches are available for vertical or underhung mounting in voltage ratings of 7.5, 15, 23 and 34 kV; 600 and 1200 amperes. Type "BT2" switches meet all applicable IEEE and NEMA Specifications.

Rigid Blade
Blades are made of 98% hard-drawn copper, formed into a trussed "A" frame shape that resists side thrusts and assures proper blade-contact alignment when closing the switch. An adjustable stop is provided on the blade for 90º, 105º or 135º openings. Stops are factory set for 90º opening unless otherwise specified.

A positive latch holds the blade in a closed position during short circuits. A powerful lever action has been built into the pull ring mechanism so that the operator with a hookstick can break up any contamination or ice.

Jaw Contacts
The blade-jaw contacts are silver-to-copper with silver contact buttons pressed into each blade. Jaw contact pressure is held constant by spherical bronze spring washers. The "split-tongue" design of the jaw contact centers the pressure directly over the contact area, providing excellent conductivity and prevents separation of the main contacts.

Hinge Contacts
The two blade members are attached to a wide hinge casting with contact pressure maintained with spherical bronze spring washers. The hinge contacts are silver-to-silver.

Terminals
The flat terminal pads have NEMA standard dimensions. Terminals can be supplied to fit any conductor requirements.

Insulators & Bases
NEMA Standard 3" BC station post insulators are furnished unless otherwise specified.

The standard base is fabricated from a structural Aluminum channel alloy 6061-T6. The base can also, according to customer's preference, be fabricated from structural steel channel, hot-dipped galvanized to ASTM specifications.

Ordering Information
Switch Rating Station Post Insulators Technical Ref. No. Drawing Number Approximate Weight, Pounds
Voltage Amperes Vertical Mounting Underhung Mounting Net Per Pole 3 Single Pole Units + Crate
Cont. Momen.
7.5kV
(95BIL)
400 20,000 TR 202 82000-2 82100-2 35 135
600 40,000 82001-2 82101-2 35 135
1200 61,000 82002-2 82102-2 60 210
15 kV
(110BIL)
400 20,000 TR 205 82006-2 82106-2 48 174
600 40,000 82007-2 82107-2 48 174
1200 61,000 82008-2 82108-2 77 260
23 kV
(150BIL)
400 20,000 TR 208 82012-2 82112-2 76 338
600 40,000 82013-2 82113-2 76 338
1200 61,000 82014-2 82114-2 108 434
34 kV
(200BIL)
400 20,000 TR 210 SK831219 SK831221 90 380
600 40,000 SK831219 SK831221 90 380
1200 61,000 SK831215 SK831217 132 506

Products Delta-Star Switches Engineering Center Typical Specifications Installation Help Customer Service Site Search Contacts

©2001-08 Turner Electric : Last updated: Nov 05